20" X 15" X 1" Air Filter With Cardboard Frame And Support fits Drolet Heat Commander Includes 1x filter, 1x filter holder, 2x air deflectors,...

Heat Shield Kit for 6"Ø Black Pipe- to the Ceiling Installation by SBI  This kit includes 36 self-taping screws and 1 telescopic standard shield th...

5"Ø Fresh Air Intake Kit  This kit contains 1x adapter, 2x pipe clamps, 1x outside wall termination and screws. Allows to draw combustion air ...

Regular Faceplate (29" X 44")

Black Large Faceplate Trims (32" X 50") by SBI The OA10128 Black Large Faceplate Trim Wood Inserts is a high-quality component for use with an Osbu...

Black Gasket And Silicone Kit 3/16'' X 5' fits Drolet Eco-55 Includes 5 feet (1.5 m) of replacement gasket and one tube of original high temp adh...

2"Ø X 25' Anti-Static Flex Hose fits Drolet Eco-55 Lightweight PVC duct that offers excellent flexibility at low temperature and increased resist...

Silicone & 5/8" x 8' Black Door Gasket Kit by SBi Black gasket and original red high-temperature adhesive. Recommended for EPA high-efficiency ...

Faceplate Backing Plate Kit (29 X 50) by SBI Features Specially designed for Osburn's Matrix insert and Enerzone's Destination 2.3 Size: 6 Inches ...

XL Certified Heat Shield Extension  Enables the certified modular heat shield system to be expanded. One panel and two wall supports are included, ...

6"Ø X 25' Insulated Flex Pipe for Forced Air Distribution Kit  Made of aluminum and heat-resistant insulating wool. Feature 25 feet long insulate...

7 3/16" X 26" Heat Shield for Surround/Shelf  To improve the performance and safety of your fireplace surround or shelf, you need a 7 3/16" X 26" H...

3"Ø X 5' Fresh Air Intake Kit fits Drolet Eco-55 Made of 2-ply black polyester with fiberglass insulation.

Regular Faceplate (29" X 44")

Large Faceplate (32" X 50")

Large Faceplate (32" X 50")  

130 CFM Blower Kit with Variable Speed Control by SBI Features Unit also includes a thermodisc Heavy-duty design that's built to last 130 CFM moto...

5"Ø Fresh Air Intake Kit  This kit contains: 1x adapter, 2x pipe clamps, 1x outside wall termination and screws. Allows to draw combustion air...

Rigid Firescreen  Fits Century CW2100-I Wood Burning Insert.  Installation Instructions

Door Handle And Latch Kit fits Drolet Eco-55    

Silicone And 1/4'' X 1/2'' X 11' Black Gasket Kit fits Drolet Eco-55 Includes 11' (3.4 m) of flat black door gasket and one tube of red original ...

3"Ø X 10' Insulated Flex Pipe For Fresh Air Intake Kit fits Drolet Eco-55 Made of 2-ply black polyester with fiberglass insulation.

Hopper Extension fits Drolet Eco-55  This hopper extension increases the hopper capacity of the ECO-55 (DP00070) and the ECO-55 ST (DP00071). For ...

Leg Assembly For AC01463 Discharge Tank fits Drolet Eco-55 Set of galvanized steel legs with nuts and bolts for the stand alone auxiliary dischar...

Stand Alone Auxilliary Discharge Tank fits Drolet Eco-55 This unit is a complement to the main AC01460 storage tank and can be installed anywhere...

Storage Tank Extension For AC01460 fits Drolet Eco-55 For large pellet consumers, an extension to the storage tank that allows the addition of 15...

Storage Tank With Pneumatic Self-Feeding Pellet System fits Drolet Eco-55 Similar in size to your 200-gallon oil tank, this innovative product can ...

Triple Hot Air Supply Adapter Kit fits Drolet Heat Commander This triple hot air supply adapter is designed to allow the installation of a wood f...

Rear Heat Shield For Atlas Cook Stove It's possible to reduce the clearances safely and install the cookstove closer to the walls by permanent...

60" X 64 1/8" Certified Modular Heat Shield System  Designed for free-standing solid-fuel stoves. a cheap, lovely, and secure way to successfully m...

Heat Shield for Surround/Shelf  When installing a zero clearance fireplace, this heat shield is used to lower the minimum height necessary between ...

Projection Kit for Insert 2" or 4" by SBI Features Specially designed for Osburn's Matrix insert and Enerzone's Destination 2.3 Size: 50 I...

Faceplate Backing Plate Kit (29 X 44) by SBI Features Specially designed for Osburn's Matrix insert and Enerzone's Destination 2.3 Optional access...

Bottom Faceplate Backing Plate 44" X 6" by SBI made of durable steel measures 44" x 6" specially designed for Osburn's Matrix insert and Enerzone'...

Heat Shield (Double Pipe Only) Protects walls where clearances between flue pipe and combustible material (i.e. wall, ceiling) are less than the mi...

Heat Shield for Surround/Shelf by SBI When installing a zero-clearance fireplace, this heat shield is used to lower the minimum height necessary be...

Convection Blower | PDV/PI/CORN/PU (PU-4C447) (PU-4007 BLOWER) PU-4C447 Blower Specifications: 1550 RPM 250 CFM 115v 60Hz 0.19A Class B Insulation  

Cap Single Wall Black Pipe - 6''Ø for Drolet 6" single wall cap for tee. For easy inspection, maintenance, and cleaning.  Close the access of a sin...