{"product_id":"sbi-6-inch-draw-collar-wood-insert","title":"6\" Draw Collar for Wood Insert","description":"\u003ch2\u003e6\" Draw Collar for Wood Inserts\u003c\/h2\u003e\n\u003cp\u003eFireplace inserts are especially prone to smoking at startup. The liner runs up a masonry chimney that holds the cold, so cold, heavy air sits in the flue and pushes smoke back into the room when you open the door. The SBI Draw Collar for inserts solves that before you light the fire. It sits directly on the insert's flue collar, under the liner, and a built-in heating element warms the flue so the draft is already established when you strike a match.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlug it in, keep the door closed, and give it time. Draft usually builds within 5 to 10 minutes. In extreme cold it can take 20 minutes or more.\u003c\/li\u003e\n\u003cli\u003eTo check the draft, light a match, blow it out and hold it inside the firebox. If the smoke pulls toward the flue, you're ready to light.\u003c\/li\u003e\n\u003cli\u003eA built-in thermodisc (snap disc) turns the heater off once the fire is hot enough to keep the draft going on its own.\u003c\/li\u003e\n\u003cli\u003eAs the fire dies down and the flue cools, it switches back on to prevent reverse draft and keep cold air from settling in the flue.\u003c\/li\u003e\n\u003cli\u003eIt has no fan and no moving parts, so it runs silently. Leave it plugged in all season, or put it on a timer or remote-controlled outlet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it right for your insert?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA good fit if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYour fire smokes when you light it or open the door to reload, or it's slow to take off on a cold start.\u003c\/li\u003e\n\u003cli\u003eYour chimney runs up an outside wall, where cold weather chills the flue and weakens draft.\u003c\/li\u003e\n\u003cli\u003eYou live in a tight, energy-efficient home, or exhaust fans (range hood, bath fans, dryer) pull air out of the house and work against the chimney.\u003c\/li\u003e\n\u003cli\u003eYour appliance is in a basement, or your chimney is on the short side.\u003c\/li\u003e\n\u003cli\u003eYou get puffs of smoke into the room as the fire burns down, or wind gusts push smoke back down the chimney.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot the right fix if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour chimney is the wrong size for your appliance.\u003c\/strong\u003e An oversized flue, such as an 8\" chimney on a stove built for 6\", is a sizing and listing problem. The Draw Collar doesn't change what your appliance's manual allows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour chimney isn't listed for your appliance, or it's blocked or heavily creosoted.\u003c\/strong\u003e Have it inspected and swept first. SBI recommends this before installing any Draw Collar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour wood is wet.\u003c\/strong\u003e Unseasoned wood smokes and drafts poorly no matter what's on the flue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou need draft help during power outages.\u003c\/strong\u003e The Draw Collar is electric and won't run without power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour insert doesn't have a properly sized liner.\u003c\/strong\u003e The Draw Collar works with a liner and doesn't replace one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou have a freestanding stove.\u003c\/strong\u003e Choose the \u003ca href=\"\/products\/sbi-6-inch-draw-collar-wood-stove\"\u003e6\" Draw Collar for Wood Stoves (AC02610)\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter: 6\"\u003c\/li\u003e\n\u003cli\u003eConstruction: stainless steel with a square mounting plate\u003c\/li\u003e\n\u003cli\u003ePower: about 500 W at 110-120 V. Plugs into a standard grounded 3-prong outlet. If you need an extension cord, use one rated for at least 1,875 W, 16 AWG.\u003c\/li\u003e\n\u003cli\u003eInstallation: set it on top of the insert's flue collar with the temperature sensor plate toward the front, slide the insert into the fireplace, then connect the liner to the top of the collar. In a tight install, attach the collar to the liner first, then to the insert.\u003c\/li\u003e\n\u003cli\u003eDon't install it in an attic, closet, floor, ceiling or other concealed space, or on the roof.\u003c\/li\u003e\n\u003cli\u003eSafety: listed to UL 1482 and CSA C22.2 No. 3, per the manufacturer's installation manual\u003c\/li\u003e\n\u003cli\u003eFits: Drolet, Osburn, Enerzone and Englander wood inserts, plus other inserts with a 6\" flue outlet\u003c\/li\u003e\n\u003cli\u003eWarranty: 1-year limited (SBI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Manual\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0533\/9683\/2421\/files\/draw-collar-installation-manual-stove-and-insert.pdf?v=1794493370\" title=\"Download the Draw Collar manual\" target=\"_blank\"\u003e\u003cimg alt=\"Download link\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0533\/9683\/2421\/files\/Download_Logo_Orange_480x480.png?v=1624703734\" width=\"183\" height=\"45\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"SBI","offers":[{"title":"Default Title","offer_id":51507654099183,"sku":"AC02613","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0533\/9683\/2421\/files\/6-draw-collar-for-wood-insert-1267166515.jpg?v=1794503049","url":"https:\/\/fyredirect.com\/products\/sbi-6-inch-draw-collar-wood-insert","provider":"Fyre Direct","version":"1.0","type":"link"}